The new Raceland Europe Volkswagen Jetta MK5 Primo Adj Damping Coilovers 50mm Strut Diameter Kit is an adjustable damping Coilover kit that gives Volkswagen owners another range of adjustability and control over their suspension, to further enhance the driving experience and vehicle feedback. Over 18 months of testing has gone into the development of the Raceland adjustable damping shocks and components to ensure a wide range of adjustment, performance, and longevity. This Raceland 15-way controllable shock allows you to fine tune the softness or stiffness of the shock to your preferences or current driving condition. Adjustments are made easily with the included, external adjustment knobs that are located at the top of each shock so changes can be made easily without removal of any vehicle components or need of special tools. For those familiar with this Volkswagen platform, you may know that the rear shock towers are covered by the body of the vehicle, making access to the rear shocks difficult for adjustments. The rear shocks have been designed to give access to the adjusting knob without removing the shock from the vehicle. This coilover kit is one of the first to offer Raceland's new larger shock threading for quicker, easier adjustments to height and spring pre-load. All the same features from the Raceland Ultimo coilovers are carried over, including shock bodies and springs are powder coated to offer another layer of corrosion resistance and the CNC-machined, hard anodized parts allow for height adjustments 50mm-100mm below the factory ride height. As with all Raceland products, the adjustable damping coilover kits come with a 30-day satisfaction guarantee. If for whatever reason you are unhappy with your purchase or are unsatisfied with the drivability or performance of the coilover kit, you can return it within 30 days of purchase for a refund. This applies to both if the product is new or if the item has been used. The adjustable damping coilover kit is also covered by our RACELAND® EXCLUSIVE LIMITED LIFETIME WARRANTY that covers against any manufacturing defect or shock valving issue. This kit is also TUV approved, we can supply the certificate upon request. ***Please Note: When lowering your car, it is very important to run correct wheel fitment to prevent any rubbing of the wheels/tires on other components. Depending on your wheel offset, tire size etc, you may need to use wheel spacers and/or roll the fenders of the vehicle. When installing this coilover kit, it requires the use of new/unused front stretch bolts. Failure to replace these bolts may result in damage to other suspension and drive components. Please contact your local Volkswagen dealership for more information.*** **Only Suitable for models with 50mm front Strut Diameter**

Read more less

The new Raceland Europe Volkswagen Jetta MK6 Primo Adj Damping Coilovers 50mm Strut Diameter Kit is an adjustable damping Coilover kit that gives Volkswagen owners another range of adjustability and control over their suspension, to further enhance the driving experience and vehicle feedback. Over 18 months of testing has gone into the development of the Raceland adjustable damping shocks and components to ensure a wide range of adjustment, performance, and longevity. This Raceland 15-way controllable shock allows you to fine tune the softness or stiffness of the shock to your preferences or current driving condition. Adjustments are made easily with the included, external adjustment knobs that are located at the top of each shock so changes can be made easily without removal of any vehicle components or need of special tools. For those familiar with this Volkswagen platform, you may know that the rear shock towers are covered by the body of the vehicle, making access to the rear shocks difficult for adjustments. The rear shocks have been designed to give access to the adjusting knob without removing the shock from the vehicle. This coilover kit is one of the first to offer Raceland's new larger shock threading for quicker, easier adjustments to height and spring pre-load. All the same features from the Raceland Ultimo coilovers are carried over, including shock bodies and springs are powder coated to offer another layer of corrosion resistance and the CNC-machined, hard anodized parts allow for height adjustments 50mm-100mm below the factory ride height. As with all Raceland products, the adjustable damping coilover kits come with a 30-day satisfaction guarantee. If for whatever reason you are unhappy with your purchase or are unsatisfied with the drivability or performance of the coilover kit, you can return it within 30 days of purchase for a refund. This applies to both if the product is new or if the item has been used. The adjustable damping coilover kit is also covered by our RACELAND® EXCLUSIVE LIMITED LIFETIME WARRANTY that covers against any manufacturing defect or shock valving issue. This kit is also TUV approved, we can supply the certificate upon request. ***Please Note: When lowering your car, it is very important to run correct wheel fitment to prevent any rubbing of the wheels/tires on other components. Depending on your wheel offset, tire size etc, you may need to use wheel spacers and/or roll the fenders of the vehicle. When installing this coilover kit, it requires the use of new/unused front stretch bolts. Failure to replace these bolts may result in damage to other suspension and drive components. Please contact your local Volkswagen dealership for more information.*** **Only Suitable for models with 50mm front Strut Diameter**

Read more less

Our VW Transporter T5 / T5.1 T26 T28 T30 Coilovers give you the option of lowering your Transporter 25mm-75mm below the stock height with the use of our adjustable CNC-machined locking perches and included spanner wrenches. By lowering the ride height of your Transporter, it gives you the ability to perfect your stance and lower the centre of gravity of your car. This means that you will see an increase in the handling and performance of your car while still maintaining a comfortable ride quality. These coilovers have been designed and road tested specifically for the VW Transporter T6 / T6.1 T26 T28 T30 to achieve a perfect balance of street comfort and increased performance to enhance stability and grip.  To protect your suspension from the harsh winter months and salty coastal air, our dampers and springs have been powder coated for an extra level of surface corrosion resistance. As with all Raceland products, these coilovers come with a 30-day satisfaction guarantee and an exclusive limited lifetime warranty. Please Note: When lowering your van, it is very important to run correct wheel fitment to prevent any rubbing of the wheels/tires on other components. Depending on your wheel offset, tire size etc, you may need to use wheel spacers and/or roll the fenders of the vehicle. Please contact us prior to purchase to confirm your model if you are unsure. *Will only fit T26 T28 T30 models with clamp type front shock*

Read more less

Our VW Transporter T6 / T6.1 T28 T30 Coilovers give you the option of lowering your Transporter 25mm-75mm below the stock height with the use of our adjustable CNC-machined locking perches and included spanner wrenches. By lowering the ride height of your Transporter, it gives you the ability to perfect your stance and lower the centre of gravity of your car. This means that you will see an increase in the handling and performance of your car while still maintaining a comfortable ride quality. These coilovers have been designed and road tested specifically for the VW Transporter T6 / T6.1 T28 T30 to achieve a perfect balance of street comfort and increased performance to enhance stability and grip.  To protect your suspension from the harsh winter months and salty coastal air, our dampers and springs have been powder coated for an extra level of surface corrosion resistance. As with all Raceland products, these coilovers come with a 30-day satisfaction guarantee and an exclusive limited lifetime warranty. Please Note: When lowering your van, it is very important to run correct wheel fitment to prevent any rubbing of the wheels/tires on other components. Depending on your wheel offset, tire size etc, you may need to use wheel spacers and/or roll the fenders of the vehicle. Please contact us prior to purchase to confirm your model if you are unsure. *Will only fit T28 T30 models*

Read more less